how to edit or store patch
how to edit or store patch
hi, recently printed of carlos Santana Europa patch from this site, I am new to this kind of downloading and really am struggling, if someone could please help me through the first one things may fall into place the second time around, it is things like knowing where to start, do I store every time I have completed each section of the patch etc, if anyone can help I will be most grateful, regards Dave.
Re: how to edit or store patch
If I understand it right you're asking how to put the patch into your zoom guitar effects pedal. I have the G1XN EXT model. You just put each stage of the patch - if you don't know how to do it consult your zoom manual, it's really simple; in case you don't understand something I can help, and after all parts of the patch have been entered you save by pushing "STORE" button two times - with first push the panel flashes and with second push zoom saves the patch and the patch code displays normally.
-
- Posts: 1
- Joined: Thu Mar 01, 2018 3:53 pm
Re: how to edit or store patch
I have the same problem on how to enter the settings to a zoom G1on. I have tried looking at the instruction manual but it does not really help, it explains how to change settings and swap patches and i can scroll through pre installed patches on the device, but I cant find how to enter the settings for the patch i am trying to install. the table for the patch shows the required settings and there are 5 effects, FD VIBRO , DELAY 320 etc. Do I have to locate these effects in the device first by name and then change their settings ?
-
- Posts: 1
- Joined: Sat Sep 08, 2018 1:02 pm
- Contact:
Re: how to edit or store patch
The same problem for me too. The pre-installed patches work fine but can't apply other patches. Is there any guide available online?richardjon wrote: ↑Thu Mar 01, 2018 5:42 pm I have the same problem on how to enter the settings to a zoom G1on. I have tried looking at the instruction manual but it does not really help, it explains how to change settings and swap patches and i can scroll through pre installed patches on the device, but I cant find how to enter the settings for the patch i am trying to install. the table for the patch shows the required settings and there are 5 effects, FD VIBRO , DELAY 320 etc. Do I have to locate these effects in the device first by name and then change their settings ?
how to edit or store patch
HELP This is what I need for a project, to have Drum Pattern 28 Jazz01 changed to 3/4 time for 80 measures - the first 80 measures of the project. How can that be done? The manual pgs 102-103 is not clear Wow, could that be true?. gf
<a href="https://www.noriualaus.com/best-stainless-steel-rice-steamer/">https://www.noriualaus.com/</a>
-
- Posts: 1
- Joined: Mon Feb 18, 2019 11:42 am
- Contact:
Re: how to edit or store patch
This same problem was occurs previous when i was loading but after you can see the results in patches but tried restarting itDonaldBryan wrote: ↑Sat Sep 08, 2018 1:41 pmThe same problem for me too. The pre-installed patches work fine but can't apply other patches. Is there any guide available online?richardjon wrote: ↑Thu Mar 01, 2018 5:42 pm I have the same problem on how to enter the settings to a zoom G1on. I have tried looking at the instruction manual but it does not really help, it explains how to change settings and swap patches and i can scroll through pre installed patches on the device, but I cant find how to enter the settings for the patch i am trying to install. the table for the patch shows the required settings and there are 5 effects, FD VIBRO , DELAY 320 etc. Do I have to locate these effects in the device first by name and then change their settings ?
-
- Posts: 1
- Joined: Fri Mar 29, 2019 8:37 am
Re: how to edit or store patch
you should check the manual as i have the older version and its mention in manual at page 57 the exact settingnikolagronc wrote: ↑Mon Feb 18, 2019 11:49 amThis same problem was occurs previous when i was loading but after you can see the results in patches but tried restarting itDonaldBryan wrote: ↑Sat Sep 08, 2018 1:41 pmThe same problem for me too. The pre-installed patches work fine but can't apply other patches. Is there any guide available online?richardjon wrote: ↑Thu Mar 01, 2018 5:42 pm I have the same problem on how to enter the settings to a zoom G1on. I have tried looking at the instruction manual but it does not really help, it explains how to change settings and swap patches and i can scroll through pre installed patches on the device, but I cant find how to enter the settings for the patch i am trying to install. the table for the patch shows the required settings and there are 5 effects, FD VIBRO , DELAY 320 etc. Do I have to locate these effects in the device first by name and then change their settings ?
-
- Posts: 1
- Joined: Mon Jan 03, 2022 9:53 am
- Contact:
Re: how to edit or store patch
what should be do in new version?manymaniyaa wrote: ↑Fri Mar 29, 2019 11:19 amyou should check the manual as i have the older version and its mention in manual at page 57 the exact settingnikolagronc wrote: ↑Mon Feb 18, 2019 11:49 amThis same problem was occurs previous when i was loading but after you can see the results in patches but tried restarting itDonaldBryan wrote: ↑Sat Sep 08, 2018 1:41 pm
The same problem for me too. The pre-installed patches work fine but can't apply other patches. Is there any guide available online?