How to download patches into AX3000G from pc

Discuss patches/presets for Korg units
chanect
Posts: 2
Joined: Sat May 05, 2012 2:54 pm

How to download patches into AX3000G from pc

Post by chanect » Sat May 05, 2012 3:02 pm

Hi, I'm new to this ... please forgive my ignorance ... Can anybody please advise me how to download patches from my pc to the AX3000G. I've got my effect unit connected to my pc via midi to usb, but when I launch the patch from my pc, it seems my pc cannot read the AXP files ... paid $50 for my cable but now I'm stuck ... Please help ... :|

Neverwind
Posts: 1
Joined: Sun Oct 14, 2012 7:21 pm

Re: How to download patches into AX3000G from pc

Post by Neverwind » Sun Oct 14, 2012 7:34 pm

Hello,
1. First make sure your MIDI2USB interface is correctly recognized by your OS.

2. Then, make sure your FX processor is connected via the MIDI2USB interface the right way:
MIDI IN cable connector -> MIDI OUT port on the unit
MIDI OUT cable connector -> MIDI IN port on the unit

3. After that, when you launch if you get a message that a DUMP DEVICE is not connected, press OK. Go to MIDI menu -> MIDI SETUP. From there you should select your USB AUDIO INTERFACE (the MIDI2USB Interface) as both MIDI IN and MIDI OUT device.

Then, you can open patch files with FILE->OPEN or DRAG&DROP

Hope I've been of help ;)

chanect
Posts: 2
Joined: Sat May 05, 2012 2:54 pm

Re: How to download patches into AX3000G from pc

Post by chanect » Mon Oct 15, 2012 3:08 pm

Thanks for your concern and advice ... I will try it this weekend at the studio and get back to you if successful. Cheers! :)

Post Reply